澳洲8现场开奖直播

Makes Molds of Any Size for Architectural and Artistic Reproductions. 

Uses: Build up this flexible polyurethane mold-making paste in one application to replicate intricately detailed architectural elements. Use on both vertical and overhead surfaces. Designed for making molds of elements that cannot be removed from the structure, as well as molds with severe undercuts, including: busts, statues, finials, reliefs, and furniture parts where a one part mold is desirable. Other typical uses include reproducing capitals, ceiling medallions, corbels, moldings, figurines, and other three dimensional objects. Molds are reusable.

Features and Benefits: MasterMold 12-3 is easily spread on the model to produce a smooth, bubble-free mold surface that captures the finest details. The molds are ready to use in less than one day. Its elasticity, softness, and high strength permit easy peeling from intricate shapes. Support molds for supporting the flexible mold while casting, can be made with plaster, WoodEpox®, or resin/fiberglass techniques. Release agent is necessary for both the model and when casting the mold in most instances. A release agent is not necessary for water-based casting materials.

Technical Characteristics:  Hardens in 8-12 hours at room temperature. Easy proportioning of 1 part resin to 1 part hardener by volume.

DescriptionUnitQtyPrice
2 Quart
$74.00
2 Gallon
$205.80
10 Gallon
$912.75

澳洲8开奖历史

Kg/cm2
Mpa
Psi
Elongation >600%
Hardness, Shore A 38
Tensile Strength 12.7 180

澳洲8群

    Is there shrinkage from the original item to a reproduction of that item?
  1. Q Is there shrinkage from the original item to a reproduction of that item? answer now
    Asked by Darryl MacLeod on March 29, 2022 9:01 pm
    Answered by the admin

    no

  2. I need to replicate round feet on a cabinet. Several have rotted out and off. I was going to use the liquid wood and then the mold with wood epox to build up the feet. Will mastermold work for this?
  3. Q I need to replicate round feet on a cabinet. Several have rotted out and off. I was going to use ...... Read more answer now
    Asked by Charlotte on August 3, 2019 12:43 pm
    Answered by the admin

    You can make a mold of the item you wish to replicate with the MasterMold.

  4. Looking for a cost effective solution to replicating several terra cotta corinthian capitals that cap composite windows on a c. 1900 residence.
  5. Q Looking for a cost effective solution to replicating several terra cotta corinthian capitals that...... Read more answer now
    Asked by Beth Scripps on September 28, 2018 10:39 am
    Answered by the admin

    Please call our technical department at 800-445-1754.

    Answered by the admin

    Please call our technical department at 800-445-1754.

    Answered by the admin

    Please send your photos and details of dimenstions to info@abatron.com.

  6. Looking for supplier in Canada.Thanks
  7. Q Looking for supplier in Canada.Thanks answer now
    Asked by Harvey Frame on March 30, 2018 11:20 am
    Answered by the admin

    The Mastermold 12-3 is not available at any of our dealers. You can order it directly from us. We ship orders via UPS.

  8. What size kit do I need for making a mold for crown moulding that is 5" wide 2" deep and 8' long
  9. Q What size kit do I need for making a mold for crown moulding that is 5" wide 2" deep and 8' long answer now
    Asked by Aleksandr Shakh on August 29, 2017 7:55 pm
    A You will need at least one 2 gallon kit. If you would like help calculating the volume needed please call customer service at 800/445-1754.

Send me a notification for each new answer.

澳洲8走势图

There are no reviews yet.

Be the first to review “MasterMold 12-3®

Your email address will not be published.

澳洲8开奖规律